1993 - 16" A2L (Limited) - A2L010162

A repository for serial numbers. Given some time, we can decode what the numbers mean, which will allow easier identification of the Barracuda frames.
DPDISXR4Ti
Regular visitor
Regular visitor
Posts: 36
Joined: February 13th, 2012, 9:22 pm
Location: New York

Re: 1993 - 16" A2L (Limited) - A2L010162

Post by DPDISXR4Ti »

neo_pop_71 wrote:My seatpost was butchered by the previous owner, I used my micrometer and it measured 29.93mm, so I'm calling it a 29.4 seatpost.


Came across this thread while searching for info about seatposts. While your 29.93mm measurement sounds correct, I'm not so sure about your "rounding" to 29.4. I just cleaned my seatpost and revealed a stamping of 30.0mm along with a date of October 1993.
Brad

neo_pop_71
Moderator
Moderator
Posts: 1184
Joined: September 12th, 2010, 7:39 pm

Re: 1993 - 16" A2L (Limited) - A2L010162

Post by neo_pop_71 »

Hmmm... 0.06mm is a big stretch when you consider that seat post come in 0.01 increments I have since bought two other 29.4 seat posts for my A2L, that is definitely the correct size. I had a 30.0 Thomson that I hoped would fit but there was no way without ham fisting the thing in and ruining the frame.

Post Reply