Page 3 of 3
Posted: September 28th, 2015, 1:26 pm
The last set of fairing brackets. It stabilizes the rear of the mid fairing to the frame top tube.
Posted: September 28th, 2015, 1:41 pm
The air box on an RZ incorporates the battery box. To eliminate the air box, I cut the battery box off of it. The battery box gets its front mount from the air box. With the air box gone, I built a bracket to stabilize the front of the battery box.
Posted: January 7th, 2016, 2:58 pm
I worked pretty hard over the Holidays to finish bracing the frame in preparation for the welder.
Posted: January 14th, 2016, 12:39 pm
Just waiting for the welder dude to become available. Decided to modify my swingarm for spools. He can weld that as well. This is a tapped 6061 tube installed all the way through each side of the drilled hollow swingarm.